Multistage Pumps - Vertical Inline Pumps

JVI Series

VERTICAL INLINE MULTISTAGE PUMPS

The vertical inline multistage pumps are fundamentally centrifugal pumps with multiple interconnected impellers, which help generate high levels of pressure and help send the fluids to a greater height. JEE Pumps has introduced the JVI Series Vertical Inline Multistage Pumps, widely used in installations that need a high head. As per requirement, several impeller stages are connected in series formation, and the inlet and outlet are kept at the same level. These pumps are beneficial for transferring liquids with low viscosity, non-inflammable and clear fluids in applications like water supply, water treatment and other industrial uses of high pressure.

Features
Applications
Operating Data
Get Quote

Water Supply System

Our JVI Series Vertical Inline Multistage Pumps are extensively used in water circulating applications like irrigation, desalination, water treatment and various pressure boosting systems.

Commercial Buildings

One of the most common uses of our JHAF Series Centrifugal Horizontal Axial Flow Pumps is in commercial buildings to send water to the overhead tanks or other similar applications, which require an enormous amount of head.

Handling Thin Liquids

The JHAF Series Centrifugal Horizontal Axial Flow Pumps are suitable for handling thin, non-explosive, clear and non-corrosive liquids. Hence they are deployed by many industries to cater to several applications.

Irrigation Works

The JVI Series Vertical Inline Multistage Pumps can transfer water at a high head and with a lot of pressure. Hence, they are suitable for pushing water and raising the levels in the irrigation canals and water tanks.

Features

Able To Generate A High Level Of Pressure Serving Fluids To High Head Levels
Direct Drive Pump And Motor Shafts Are Designed For Positive, Reliable Power Transmission With No Major Adjustments Needed During Installation.
Air Vent Provided In Casing Cover Ensures Proper Venting To Avoid Dry Run.

A Low Axial Thrust Impeller Helps In Extending The Motor Bearing Life.
Industry-Standard Flanges Are Used, Which Allow For Easy Replacement Or Upgradation
The Liner Ring Is Specially Designed To Prevent Swelling When Running At High Temperatures.

Operating Data

Capacity	Up to 1280 m³/hr
Power Range	0.37-45 kW
Head	Up to 320 Mtr
Discharge Size	32mm To 100mm
Temperature	-15°C to 120°C
Speed	Up to 2900 Rpm
Pressure	Up to 32 bar
Sealing	Mechanical Seal
Flange type	Round Flange, PJE Coupling, Oval Flange
M.O.C.	Cast Iron, SS304, SS316