JHAF Series

CENTRIFUGAL HORIZONTAL AXIAL FLOW PUMPS

JEE Pumps has introduced JHAF Series Centrifugal Horizontal Axial Flow Pumps, extending its range of centrifugal pump products. It operates on the principles of standard axial flow pumps, where the pressure is generated by fluid flow over the impeller blades. The impeller is a propeller-type setup in a casing. In this pump design, the flow is as per the horizontal axial. The most significant advantage of the JHAF series pumps is that they can operate at a very high flow rate for a relatively low head. This means the pumps can push a huge volume of fluid in the horizontal direction. Because of this characteristic, these pumps are widely used for transferring water in various applications.

Applications

Water Supply System

Our JHAF Series Centrifugal Horizontal Axial Flow Pumps are extensively used in water circulating applications like irrigation, desalination, water treatment and various wastewater applications.

Irrigation Canals

The JHAF Series Centrifugal Horizontal Axial Flow Pumps can transfer a massive volume of water at a high flow rate. Hence, they are suitable for pushing water and raising the levels in the irrigation canals.

Dewatering Applications

Pumps with a high flow rate are always preferred for dewatering applications, which is why our JHAF Series Centrifugal Horizontal Axial Flow Pumps are widely used to remove a large amount of water in a short time.

MEE Plants

Multi-Effect Evaporator plants operate with the principle of the high volume of liquid being recirculated again and again to expose more to evaporation. Our JHAF Series Centrifugal Horizontal Axial Flow Pumps work well in these high-volume applications.

Features

The pump design includes a heavy-duty thick metal suction at the elbow, stuffing box and impeller, which extend the pump's wear life.

High-efficiency impeller available in a wide variety of vane angles

Can discharge a large volume of fluid at a high flow rate

Extra-large lubrication oil sump provided, which ensures better heat transfer

Bearing stays cooler and hence lasts longer.

Operates at high efficiency and low maintenance cost for a long life

Operating Data

Capacity Up to 14000 m³/hr
Head Up to 8 Mtr.
Discharge Size 6" to 36"
Temperature -40°C to 200°C
Speed Up to 3500 rpm
Pressure Up to 10 bar
M.O.C. C.I,C.S.,SS-304/304L, SS316/316, Bronze, Alloy-20, CD4MCU Hast alloy B&C, etc.